OWL, INC. WTO-S35 CALIBRATION and OWL, INC. WTO-S35 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the OWL, INC. WTO-S35 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   OWL, INC. WTO-S35   Description / Specification:    
OWL, INC. WTO-S35 OWLTrek OTDR

The Optical Wavelength Laboratories WTO-S35 OWLTrek OTDR is pocket-sized, but the large 2.8" high-resolution color LCD display can show even the longest traces with ease. And, for greater viewing flexibility and trace detail, OWL has implemented state-of-the-art MEMS technology which "flips" the high-resolution color LCD display between portrait and landscape mode automatically. In landscape mode, a wider viewing area means greater viewing detail. Automatic event location is an advanced feature normally found only in expensive, high-end OTDRs. The OWLTrek OTDR now brings this feature to the entry-level OTDR market. While in event location mode, the OWLTrek OTDR marks events on the trace, has an event table showing the location, type, reflectance level, and loss of each event, and auto-zooms to the selected event. Specifications. Output Wavelength: 1310 / 1550 nm. Fiber Type: Singlemode. Dynamic Range (SNR=1)( Using maximum pulse width): 25 / 23 dB. Distance Range: 80 miles (128 kilometers). Event Dead Zone: 2 meters (typical). Attenuation Dead Zone: 7 meters (typical). Maximum Data Points: 64000. Data Point Spacing: Up to 64km: 1 meter // Over 64km: 2 meters. Pulse Width: 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 meters. Index of Refraction: 1.4000 to 1.6000. Distance Accuracy: Up to 64km: 1 + (distance in meters/10000) // Over 64km: 2 + (distance in meters/10000). Number of Stored Traces: Maximum trace distance: up to 200 // Minimum trace distance: 3000+.



 

Standard Calibration $350.00 *
*This is a Web introductory price for one calibration of the OWL, INC. WTO-S35. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Absolute Wavelength Accuracy
Absolute Wavelength Accuracy is the maximum difference between the actual wavelength and the displayed wavelength of the Optical Source. Wavelength is defined as wavelength in vacuum.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Relative Intensity Noise (RIN)
Relative intensity noise (RIN), describes the instability in the power level of a laser. The noise term is important to describe lasers used in fiber-optic communication and LIDAR remote sensing. It is the square of the (spectrally resolved) RMS optical power amplitude divided by the measurement bandwidth and the square of the average optical power, expressed in dB/Hz.

Total Return loss
In an optical fiber, the loss that takes place at any discontinuity of refractive index, especially at an air-glass interface such as a fiber endface, at which a fraction of the optical signal is reflected back toward the source. RL = - 10log10 (Preflected/Preference)

Please contact us for your OWL, INC. WTO-S35 CALIBRATION and/or OWL, INC. WTO-S35 OWLTrek OTDR REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: